How to open your Tecno Spark K7
Just after buying your Tecno Spark K7, you may have difficulties to open it. Certainly, this is important to know how it works to replace the battery, the SIM card or any other part of your Tecno Spark K7.
In this article, we’ll show you how to open your smartphone.
But first, we recommend having a health diagnostic of your phone before opening it.
Then, we recommend watching tutorials on how to open your smartphone, and reading our tips below.
How to open the battery cover of your Tecno Spark K7
There are models with a sealed case that prevents you from opening it easily. We therefore recommend that you find out in advance whether your smartphone model has a removable battery cover.
If your Tecno Spark K7 has a removable cover, proceed as described below.
- Before starting, it is best to turn off your Tecno Spark K7.
- Find the fulcrum on the battery cover of your smartphone.
- Carefully open the cover starting with the edge containing a notch called the pivot point.
- You can now gently open the other sides of the shell.
Please pay attention to each step so as not to damage the device and its components such as SIM card and battery.
How to open a closed lid with glue
If your Tecno Spark K7 has a cover closed with glue, you can still remove it.
How it works will be covered in the following steps.
Keep in mind that the procedure is at your own risk. In particular, you may lose any warranty covering your Tecno Spark K7.
- Turn off your Tecno Spark K7 first.
- Place it on a cloth or the like to prevent scratches from appearing on your screen before proceeding to the next steps.
- Use a thin metal tool, such as a flat screwdriver, to open the cover.
- Place it on the edge between the battery cover and the device.
- You should have found a little gap between them.
- Now take a piece of thin plastic, a plectrum for example, to be able to open the lid.
- Insert the plectrum into the small space between the lid and the device. Open your Tecno Spark K7 by sliding the plectrum along the gap.
- If you can’t immediately open the cover because of the glue, you can use a hair dryer to make it easier to open.
Please be careful when opening your Tecno Spark K7.
- If you removed the cover, you need to remove all visible screws.
- You can now remove the frame to access the battery.
To conclude, we would like to inform you again to carry out all the steps carefully, so as not to damage your smartphone. Also, please keep in mind that you may lose your warranty when opening your Tecno Spark K7. Finally, after the operation is complete, we recommend having another health diagnostic of your phone.
We hope to have helped you to open your Tecno Spark K7.
You can also consult our other articles:
You need more? Our team of experts and passionate can help you.